Can be used to trigger certain input functions based on internal/external conditions.
Name of the function.
Condition X for activation of the function.
Condition(s) to be used for this internal function to be triggered.
turn on delay
Specifies a delay time (in seconds) to be used when condition (s) are active before actually triggers this function.
turn of delay
Specifies time (in seconds) to delay a active function before actually disabling the function.
Whether to use an inversion of the actual input conditions or not.
For example if all conditions are inactive, and this is set to inverted, the output is going to be active.
Flash feature of function with different options:
•Slow flash when output active
•Fast flash when output active
•Slow flash when output inactive
•Fast flash when output inactive
Note: The flash functionaility is mostly used when light bulbs/LEDs are wired to physical output.
INputs to control
Selects which MaxxECU digital input function to be triggered by the conditions.
Note: as of MTune 1.107 two inputs can be controlled by the same internal output function.
In the above example we will trigger the input function Start logging when condition (A and B) or C is active and
log for 120 seconds. In other words: When engine is over 3000RPM AND over 0.4bar (5.8 PSI) of boost, MaxxECU starts to log.
Also, automatically starts to log upon errors.