Intake Air Temperataure sensor (IAT)
IAT sensor type
Specifies the IAT type used.
IAT fail-safe/failure detection
Enable or disable the error detection/failure detection on IAT sensor.
•Disabled - No fail-safe or failure detection (don't use this option unless you know what you are doing).
•Enabled, default values - If the system detects an error, the default value of 30deg C is used and an error code i thrown.
•Enabled, custom thresholds - Define your own threshold error detection values, and the actual output value when an error is detected.
IAT OFFSET
Some sensors require a voltage offset. This may be due to atmospheric changes or unforeseen external changes.
Error below voltage
Specifies the below voltage to trigger error detection.
Error above voltage
Specifies the above voltage to trigger error detection.
fail-safe output value
Specifies the actual output value when an error is detected.
No IAT temperature sensor selected, IAT is always 30deg C which is used by the VE model to calculate fuel.
Coolant temperature sensor (CLT)
CLT sensor type
Specifies the CLT type used.
CLT fail-safe/failure detection
Enable or disable the error detection/failure detection on CLT sensor.
•Disabled - No fail-safe or failure detection (don't use this option unless you know what you are doing).
•Enabled, default values - If the system detects an error, the default value of 30deg C is used and an error code i thrown.
•Enabled, custom thresholds - Define your own threshold error detection values, and the actual output value when an error is detected.
CLT OFFSET
Some sensors require a voltage offset. This may be due to atmospheric changes or unforeseen external changes.
Error below voltage
Specifies the below voltage to trigger error detection.
Error above voltage
Specifies the above voltage to trigger error detection.
fail-safe output value
Specifies the actual output value when an error is detected.
Throttle position sensor (TPS)
TPS sensor used
•Use input as TPS sensor for mechanical throttle - Wire the TPS signal to this input if using a mechanical throttle body.
•Use input as other 0-5V function - When using E-Throttle, this input can be used as any other 0-5V input (even pedal/throttle position inputs), see example below.
TPS closed voltage
Calibrates throttle position sensor in fully closed position.
Must always be calibrated when throttle position is adjusted!
Release throttle and press "Get current voltage" to calibrate sensor.
TPS open voltage
Calibrates throttle position sensor in fully open position.
Must always be calibrated when throttle position is adjusted!
Release throttle and press "Get current voltage" to calibrate sensor.
TPS failure detection
Enable or disable the error detection/failure detection on TPS sensor.
Examples
Use the TPS input wire as other 0-5V function (when using E-Throttle)
When TPS sensor used = use input as other 0-5V function, a new settingspanel is visible in MTune, Inputs --> AIN on TPS input.
Here you can select what type of sensor is used on the TPS analog input wire.
Use an EGT type-K input as IAT
To use an EGT input as a IAT sensor, set type to ON EGT sensor input, and select the wired input.
