High beam setting
input type
•Switch - The lights are on/off depending on the input state of Lights, high beam.
•momentary button - Mostly used when high beam on/off and flash to pass function is used with the very same and only button for high beam.
Flash to pass
Flash to pass input
•flash to pass input - Lights, flash to pass PDM digital input pulse will trigger the flash to pass function, see examples below.
•flash to pass and high beam input - Lights, flash to pass or Lights, high beam PDM digital input pulse will trigger the flash to pass function, see examples below.
Flash speed
Specifies the amount of flashes per second.
Flash count
Specifies the total amount of flashes when the flash to pass functions is activated.
Examples
Flash to pass using and extra button to flash
1. Setup the actual HIGH beam button as a 2 positions button input, Lights, high beam as button function.
2. Set the "flash" button as a momentary one, and the button function to Lights, flash to pass.
3. Set input type = Switch, and flash to pass input as above.
The above will listen to the Lights, high beam PDM digital input function to set the state of the Light high beam PDM output function, and when the PDM digital input function Lights, flash to pass is triggered, the high beam output will do three blinks at the blink speed setting above.
Flash to pass using the high beam button
1. Setup the actual HIGH beam button as a momentary button input, Lights, high beam as button function.
2. Set input type = momentary button and flash to pass input as Flash to pass and high beam input.
The above will set the high beam output on/off with "longer button press", and a short press will trigger the flash to pass and do three blinks at the specified blink rate speed.
Note: It will regardless flash of high beam on/off state.
