Please enable JavaScript to view this site.

MaxxECU online help

keypad settings

 

Keypad

Select the CAN keypad you have installed.

Note: Currently we support the CAN PRO keypads, 4, 6, 8 and 12 key from Blink Marine.

 

 

The below is only available for PDM keypads.

backlight control

Always on - The backlight is always on, programmed at Keypad setup.

on/off with ignition on (no off delay) - The backlight is turned off when ignition key is OFF.

on/off with ignition on (1 min off delay) - The backlight is turned off after 1 minute when an ignition key OFF event is detected.

on/off with ignition on (5 min off delay) - The backlight is turned off after 5 minutes when an ignition key OFF event is detected.

 

backlight level, lights off

Specifies the background light level when lights is OFF.

 

backlight level, lights on

Specifies the background light level when lights is ON.

Note: 0-63, where 63 is the brightest, listens to the digital inputs functions: Lights, low beam, Lights, high beam and Lights, park.

 

 

 

button settings

 

Description

Name/description of the button, used for identification.

 

button steps

Sets the type of switch to be used.

Not used/used by other ECu/PDM.

MOMENTARY - Shifts Button state between ON (1) and OFF (0). Only ON (1) when the switch is press and hold.

2 positions - Shifts Button state between 0 and 1.

3 positions - Shifts Button state between 0, 1 and 2.

4 positions - Shifts Button state between 0, 1, 2 and 3.

5 positions - Shifts Button state between 0, 1, 2, 3 and 4.

6 positions - Shifts Button state between 0, 1, 2, 3, 4 and 5.

 

 

Functions

 

input function (s)

The Digital input function to trigger when the current switch changes state from 0.

Note: A later update will include to trigger different digital input function based on the switch state above 0 and 1, for now use the internal output.

 

 

Button LED

 

button state colors

Sets the colors to be used depending on the current switch state.

off, green, blue, yellow, cyan, purple.

red, green, blue, yellow, cyan, purple.

Not used.

 

fault indication

Option to blink the button in red to indicate any, or specified fault.

 

User color 1/2

Option to set a certain keypad button color upon user condition.

 

 

 

Examples

clip1051

The above example will use the default color Red on the switch when nothing is pressed, but when pressed it will light up Green, change to boost level 2 and stay Green until pressed again.

 

 

clip1052

The above example will change the switch state ONLY when the button is pressed, during key press, MaxxECU will start logging (if ECU loggings is set to input switch) and colored Green during press.